	150-Model The autogas pump, as the 150-Model is commonly known, is just what it's name implies, it was designed around high pressure propane motor fueling and has features that best meet the needs of that industry. The other Coro-Flo pumps are also used for propane motor fueling at lower pressures and flows. Flow range: 12 – 58 gpm (45.4 – 219.6 L/min) Maximum differential pressure: 250 psid(17.2 bar) Maximum driver size: 20 hp (14.9 kW) Dual 50/60 Hz capability ANSI or DIN flanges Direct couple or use a bracket to couple to a C-face motor
	F-, DS-, DL-Model The F-, DS-, DL-Model pumps are all designed to perform the same and differ only in the shaft and bearings. These differences allow them to be mounted differently. The F-Models have mounting feet and are made to be directly coupled with a motor or engine driver on a base plate. The DS-, DL-Models are made to be used with a special bracket and coupled to a C-face motor for space conversation. Flow range: 2-36 gpm (7.6-136.3 L/min) Maximum differential pressure: 75-125 psi (4.8-8.6 bar) Maximum driver size: 10 hp (7.5 kW) Made for 60 Hz-limited use in 50 Hz NPT or ANSI flanges
	C-Model The C-Model is most commonly used as a bottle and cylinder filling pump. It is UL (Underwriters' Laboratories) listed for use with LPG. It is a close coupled pump literally built onto the motor shaft. This eliminates the need for alignment and makes for a very compact and economical pump. Flow range: 2-36 gpm (7.6-136.3 L/min) Maximum differential pressure: 75-125 psi (4.8-8.6 bar) Maximum driver size: 3 hp (2.2 kW) Made for 60 Hz-limited use in 50 Hz NPT or ANSI flanges UL listed for use with LPG
For see full catalog Click here